Amps
[Top] [All Lists]

Re: [Amps] cathode to ground in tetrode amp

To: Amps@contesting.com
Subject: Re: [Amps] cathode to ground in tetrode amp
From: Mike Bondarev <mikebond@tochka.ru>
Reply-to: Mike Bondarev <mikebond@tochka.ru>
Date: Tue, 31 Jan 2006 14:37:36 +0000
List-post: <mailto:amps@contesting.com>
Hi, Chuck.

>  WHen I first recieved this socket (3 years ago) I took it apart to measure
> the components, What I found was the ceramic looking plates inside between the
> silver plated fingers.. I will remeasure these tonight but I did not see a 
> resistor
> built in, unless these are what you are referring to?

There are 10 small gray cylinders between cathode pins and ground
(case). It's 10 resistors in parallel with total value of 0,43 ohms.
There are also ceramic bypass capacitors (blue color) between screen pins and
ground.

73's, Mike RL3BM



_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>