Bill Turner wrote:
>What can I expect for normal grid current in a GS-35b run at 3200
>volts B+ and about 750 Ma anode current in grounded grid?
>
>I need to size the grid meter appropriately and can't find any documentation.
>
Everybody's welcome to download the user manual for the Triode Board,
and the information you need is on page 12:
http://www.ifwtech.co.uk/g3sek/boards
A good value for full-scale on the grid meter is 400mA, and you'd
normally see about 250mA.
--
73 from Ian GM3SEK
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|