| To: | "John Popelish" <jpopelish@rica.net>, <Amps@contesting.com> |
|---|---|
| Subject: | Re: [Amps] [BULK]Re: [BULK]Re: cathode to ground in tetrode amp |
| From: | "Jim Tonne" <tonne@comcast.net> |
| Date: | Mon, 30 Jan 2006 21:27:33 -0500 |
| List-post: | <mailto:amps@contesting.com> |
Subject: Re: [Amps] [BULK]Re: [BULK]Re: cathode to ground in tetrode amp The 22 uH and 1000 pF in the grid peaks at 1 MHz and rolls off at 12 dB per octave after that. Can anyone tell me why they put a 12K resistor from screen to ground? Its on the load side of the screen current meter. Perhaps negative screen current sometimes? -JT _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps |
| Previous by Date: | Re: [Amps] [BULK]Re: [BULK]Re: cathode to ground in tetrode amp, Will Matney |
|---|---|
| Next by Date: | Re: [Amps] AC to DC, Bill Turner |
| Previous by Thread: | Re: [Amps] [BULK]Re: [BULK]Re: cathode to ground in tetrode amp, Will Matney |
| Next by Thread: | Re: [Amps] cathode to ground in tetrode amp, Will Matney |
| Indexes: | [Date] [Thread] [Top] [All Lists] |