Amps
[Top] [All Lists]

Re: [Amps] SHV Connectors & Coax

To: "Dr. David Kirkby" <david.kirkby@onetel.net>,"Dugas, Jason A. (JSC-EP)" <jason.a.dugas@nasa.gov>,<amps@contesting.com>
Subject: Re: [Amps] SHV Connectors & Coax
From: "Peter Voelpel" <df3kv@t-online.de>
Date: Tue, 3 Jan 2006 01:17:58 +0100
List-post: <mailto:amps@contesting.com>
you are  right nobody should believe what is told on the reflector ;-))

The name of Huber and Shuner could not change as the company is
and was not existing.

You mean Huber+Suhner in Switzerland (HUBN)

http://www.hubersuhner.ch/co-ch/ch-index

73
Peter



Von: "Dr. David Kirkby" <david.kirkby@onetel.net>

> Huber and Shuner used to make SHV connectors. The company was renamed 
> some time back I think, but can't recall what it is called now. They 
> actually make them - not just sell them.
> 
> The cable can potentially be quite critical on these, but if I recall 
> correctly, it is a cable the size of RG58. It probably is RG58, but 
> check with the manufacturer of the connector, not what some dumb 
> reseller tells you, or what some ham on a reflector tells you.
> 
> As for part numbers, again check the manufactuers catalogs - they should 
> be online.
> 
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>