Hi Ed,
Here is link to some ancient Eimac data for the 4-1000A in GG.
http://wc6w.50webs.com/wc6wamps/index.html?fr53.html
Looks as long as you have sufficient plate voltage, 100 watts drive will be
adequate for 1.5KW out.
If you don't have enough plate voltage available then, adding a bit of screen
voltage (still RF grounded) will increase the gain for you.
73 & Good afternoon,
Marv WC6W
P.S. -- There is always this option, if the amp doesn't work out:
http://wc6w.50webs.com/wc6waccy/index.html?fr60.html
-------------- Original message --------------
From: "Edward Foltyn" <efoltyn@adelphia.net>
<snip>
> However, everytime I read this reflector and others, I find that if > run in
> G-G, I'll need more than 100w to get in the 1300-1500w output range
>
> Thanks for the advice.
> Ed KQ1R
___________________________________________________________________
Try Juno Platinum for Free! Then, only $9.95/month!
Unlimited Internet Access with 250MB of Email Storage.
Visit http://www.juno.com/value to sign up today!
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|