I now have the operating and maintenance manual, thanks to W6RU Terry. I
though that the alignment of the tune control and all the other components
that run off the common drive chain would be covered but it is not. Does
anyone have the alignment instructions for the 4K-Ultra? Based on my current
settings, it looks like when the tune turns counter is set to 000 the cap is
at 400pf and the three air variables under the deck are fully meshed(almost,
like 95%) and the 2 roller inductors underneath are almost to their extreme
endpoints. I haven't moved anything since taking the front panel off so
maybe I should just leave everything alone, but that wouldn't be any fun.
Bob W6TR
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|