Just did some non destructive testing on the suppressor resistors.
One resistor measures 23.5 Ohms and the other just 9.5 Ohms. Nominal value
is supposed to be 22 Ohms.
It's nearly 9pm now. Too late to go to the shed to find some new resistors.
I might get some more time on it tomorrow.
73, Alek
VK6APK
At 08:45 PM 6/12/2005, Peter Chadwick wrote:
>Alek said:
> >Advancing the load cap further to the
>right to 6 or 7 on the scale brought up a nice little purple arc between
>the plates of the loading cap.<
>Certainly sounds like parasitics to me. Have you checked the original
>parasitic suppression resistors?
>As to whether nichrome is the answer, I'll leave that argument to others!
>73
>Peter G3RZP
>_______________________________________________
>Amps mailing list
>Amps@contesting.com
>http://lists.contesting.com/mailman/listinfo/amps
http://www.qrz.com/vk6apk
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|