hi .
the sb200 will run on 12m from the 10m bandswitch position and on 17m in the
15m position .
power may be slightly less than on the bands selected but will still be over
600w with 90w drive .
30m is a bit iffy if you try tuning it in the 40m section , i did try once but
the amp took off on its own , so hence i decided it was no go on 30m .
obviously youll need to readjust plate and load tuning from theyre respective
10m and 15m settings in order to run the 2 warc bands .
73 , ian m0bcg
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|