On Nov 18, 2005, at 6:23 PM, Dan Sawyer wrote:
> Thank you. The coupler I have is too high frequency for my current
> needs. I am interested in a 1 to 100 MHz bi-directional coupler.
> However
> bi-directional couplers are much less common then uni-directional
> ones.
> There appear to be uni-directional couplers in the HF and VHF range
> available.
>
> Are couplers 'reversible, that is can the output be applied to the
> input? The purpose if this would be to make a bi-directional coupler
> from 2 uni-directional couplers. Is this practical?
Yes.
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|