> As you have noted, the standard 240V plug does not bring the safety ground
> to your chassis. However, you can wire the 240V circuit with safety
> ground
> (4th wire) and run a separate ground wire from the outlet to your chassis.
> I have never seen this done, however.
Many of us on this list with older Alpha and Henry amplifiers are using
4-wire, 240VAC circuits for this very reason. The topic has been discussed
here on multiple occasions and useful related information can be found in
the archives.
Paul, W9AC
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|