Amps
[Top] [All Lists]

[Amps] Power Supplies and Blowers

To: <amps@contesting.com>
Subject: [Amps] Power Supplies and Blowers
From: Dino Darling <k6rix@earthlink.net>
Reply-to: Dino Darling <k6rix@earthlink.net>
Date: Thu, 6 Oct 2005 10:50:29 -0700 (GMT-07:00)
List-post: <mailto:amps@contesting.com>
Hello to the group!

I'm slowly moving forward on my 2 amplifier projects.  I'm in the information 
and parts gathering stage.

Amplifier #1
Single GS-35B for 6-meters

Amplifier #2
Dual GS-35B for HF

(both amps will use W4ZT's awesome sockets!)
http://www.gs35b.com/socket/index.html 


I believe I've read on here before where some owners have built MONO band amps 
but powered them all from a single power supply.  So I thought, "Why not design 
a single power supply, capable of supplying a pair of GS-35Bs easily, and have 
it power a single GS-35B also."  I should actually SAVE money over building two 
separate power supplies, although this project will be a little more expensive 
than building just one.

So, one power supply deck and TWO RF decks.  It has been suggested that I use 
vacuum relays to switch between the two RF decks.  I was hoping to have them 
both run in standby at the same time.  I obviously do not know enough and am 
therefore here seeking guidance.  I will only operate one amp at a time.

One of the big expenses is the power supply transformers.  I am aware of Peter 
Dahl and MagCap.  Are there any other suggestions for transformer 
manufacturers?  I understand that Henry had his transformers made in Los 
Angeles.  I was going to call him today.

I'm working on getting the required specs to order the appropriate 
transformers.  I am also looking for any input this group may have.

Second question, how do I determine what blower to buy?  I would think that all 
I need is a CFM requirement for the tubes and buy the appropriate blower.  I'm 
finding that its not this simple.  I was thinking that a larger blower with a 
lower RPM will be quieter.  I have given thought to building a blower enclosure 
and insulate it to help keep the noise down.  Where should I start looking for 
blowers and what advise could you give me?

I plan on documenting this project as I move along.  I'm working on getting 
some web space to post pictures and commentary.

Thanks for ANY advise you can give me!!!

Dino - K6RIX
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>