Re: [Amps] air variable min C?

[GGLL <nagato@arnet.com.ar>]

Bill Coleman N2BC escribió:
> Instead of lowering Cmin at Ctune, you can insert a small L between the tube 
> and the blocking cap. This has the effect of raising the plate load 
> resistance and increasing the minimum Ctune required at higher frequencies. 
> The effect reduces as frequency goes down of course.
> 

        This could be done connecting the plate tune cap one or two turns 
(trial and
error) ahead in the 10 Mtrs. section of the Pi inductor also.

Best regards
Guillermo - LU8EYW.
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps