Amps
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [Amps] Amps Digest, Vol 32, Issue 12: Metric system

from [Peter Chadwick] [Permanent Link][Original]
To: w5grg <w5grg@comforttexas.net>, amps@contesting.com
Subject: Re: [Amps] Amps Digest, Vol 32, Issue 12: Metric system
From: Peter Chadwick <g3rzp@g3rzp.wanadoo.co.uk>
Reply-to: g3rzp@g3rzp.wanadoo.co.uk
Date: Thu, 4 Aug 2005 17:43:04 +0200 (CEST)
List-post: <mailto:amps@contesting.com> 
Georg,

A pint is not a pound everywhere. In UK measure, a pint is 20 fluid ounces, not 
the measly US 16. A most important differenece in buying beer!
Personally, I find it easier to handle thousandths of an inch increments than 
25 microns......

73

Peter GW3RZP/P
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: [Amps] Bend allowance, Peter Chadwick
Next by Date:  Re: [Amps] Amps Digest, Vol 32, Issue 12: Metric system, Keith Dutson
Previous by Thread:  Re: [Amps] Metric system, Gary Smith
Next by Thread:  [Amps] RE : Amps Digest, Vol 32, Issue 12: Metric system, hermans
Indexes:  [Date] [Thread] [Top] [All Lists]