Amps
[Top] [All Lists]

Re: [Amps] Transformer spec's for linear amplifier-Correction

To: amps@contesting.com
Subject: Re: [Amps] Transformer spec's for linear amplifier-Correction
From: "Will Matney" <craxd@engineer.com>
Date: Thu, 07 Jul 2005 00:55:56 -0500
List-post: <mailto:amps@contesting.com>
----- Original Message -----
From: "Will Matney" <craxd@engineer.com>
To: amps@contesting.com
Subject: Re: [Amps] Transformer spec's for linear amplifier
Date: Thu, 07 Jul 2005 00:36:03 -0500
Correction, I posted a wrong link. The web host screws with the URL in the 
address bar there.

Link;

http://free.hostdepartment.com//A/ATS/pf.htm

Best,

Will


> 
> Guillermo,
> 
> If your using a full wave doubler, then the current from the 
> transformer can be found by multiplying the current by 2 and then 
> use the full wave formula for transformers. You all ready know 
> you'll need 700 mA from the doubler so just plug that into the full 
> wave supply formula. Below is a webpage of mine describing these 
> calculations.
> 
> Webpage;
> 
> http://free.hostdepartment.com/A/ATS
> 
> Best,
> 
> Will
> 
> 
> ----- Original Message -----
> From: GGLL <nagato@arnet.com.ar>
> To: "Amplificadores Lineales" <amps@contesting.com>
> Subject: [Amps] Transformer spec's for linear amplifier
> Date: Wed, 06 Jul 2005 23:13:37 -0300
> 
> >
> >     Having the need of a 2500VDC @ 350 mA maximum current power supply, and
> > planning to use a full wave voltage doubler, how can I establish the correct
> > current rating for the transformer?. It should be nearly 930 VAC and exactly
> > 700 mA of current, or can I reduce somewhat its current rating 
> > (taking in care
> > amateur, CW/SSB use, also AM at reduced carrier) so as not to expend more $$
> > than really needed?.
> > Thanks in advance
> >
> > Best regards
> > Guillermo - LU8EYW.
> > _______________________________________________
> > Amps mailing list
> > Amps@contesting.com
> > http://lists.contesting.com/mailman/listinfo/amps
> 
> 
> --
> ___________________________________________________________
> Sign-up for Ads Free at Mail.com
> http://promo.mail.com/adsfreejump.htm
> 
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps


-- 
___________________________________________________________
Sign-up for Ads Free at Mail.com
http://promo.mail.com/adsfreejump.htm

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>
  • Re: [Amps] Transformer spec's for linear amplifier-Correction, Will Matney <=