Bob Maser wrote:
>I am doing some more mods on my 3X3 amp and need to find a source for chain
>or bead drive components. My 20V-2 has some really nice stuff but I don't
>want to cannibalize it, at least at this point. I want to bring a shaft
>through the front intermediate wall of my RF deck and reposition the turns
>counter in a place on the front outer panel where it will look more
>aesthetically pleasing.
>
>Any leads would be appreciated.
>
>Thanks
>
>Bob W6TR
>
>
>
I would first have a look at Small Parts under roller chains and
sprockets at the following link. http://www.smallparts.com/components/
There are probably some others that I'm not aware of. Perhaps others
will chime in with their favorite sources for these parts.
73,
--
Ken K4XL
k4xl@arrl.net
*** BoatAnchor Manual Archive ***
On the web at http://bama.sbc.edu and http://bama.edebris.com
FTP site info: bama.sbc.edu login: anonymous p/w: youremailadr
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|