Dear friend
I'm the owner of a good one! Never had a problem, very strong
amplifier which supplys full power on all bands flawlessy.
Consider that I'm a RTTY operator and this is dangerous if you
don't have a "heavy" amplifier. I also own an Alpha 89 but frankly
I prefer 86 because less sensitive to RF.
Ciao 73
Gino IK2RZP
----- Original Message -----
From: <SamuelR717@aol.com>
To: <amps@contesting.com>; <n4dek@triad.rr.com>
Sent: Monday, June 06, 2005 3:59 AM
Subject: [Amps] Alpha 86
> N4DEK wrote
>
> I have just purchased an Alpha 86 amplifier that is supposed to be in
like
> new condition inside and out and working perfect with full output. This is
my
> first Alpha amp and I am interested in any pros/cons that I need to be
aware
> of with this model. I'm curious about all the talk about the PIN diodes
being
> weak in this one. What if anything do I need to do to protect these from
> being a problem? Do I need to keep some spare fuses on hand for this? Any
and
> all help welcome.
>
> Thanks,Don
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>
> Base on my experience, get a large supply of the small receive fuses! I
had
> an 86 for several months; it was a fine amp, EXCEPT for the pin diodes
> causing the receive fuse to blow every 4 or 5 times I used the amp (into a
quad
> with flat SWR on all bands). When the fuse blows, the amp still
functions, but
> you can't hear anything unless you manually switch into "Standby" mode.
Not
> fun trying to break a pile-up that way! I must admit that I hoped the
guy
> who sold it to me (without mentioning this problem) would develop some
kind of
> very unpleasant skin condition...
>
> I had LENGTHY conversations with Alpha Tech Support. I replaced the pin
> diodes, at their suggestion, which had no effect (which they warned me
might
> happen). Their final word was that not much could be done--some 86s had
this
> problem, some didn't, and they really didn't know why or how to fix it,
short
> of pulling the pin diode system and replacing them with vacuum relays.
They
> also warned me NOT to use a higher rated receive fuse, at risk of blowing
the
> HV PS.
>
> I finally sold it (at a loss) to a W6 who is a broadcast engineer, and who
> rebuilt it with hi speed relays and re-sold it.
>
> I eventually brought a used 87A. I had some initial probs, but worked
thru
> them with help from Tech Support, and it has served me well for the past 2
> years. I still like Alpha products, but they seems to have gone astray on
the
> 86.
>
> Good luck, and 73
>
> Sam
> AA3VD
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|