I have found it necessary to change the tube in my Emtron DX2SP amp but
the operating manual states that if a new tube is insalled that a bias
adjustment is necessary. The problem is that the manual does not
provide any information on how to do this adjustment. I have sent
Emtron an E-mail requesting the information but as of yet have not
received any reply.
Any information from anyone who has replaced this tube would be appreciated.
Steve
KT0DX
kt0dx@earthlink.net
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|