Amps
[Top] [All Lists]

Re: [Amps] Another Plate Transformer Question

To: <craxd1@ezwv.com>, <amps@contesting.com>
Subject: Re: [Amps] Another Plate Transformer Question
From: "Don Lemley" <w8hrq@comcast.net>
Date: Thu, 5 May 2005 10:39:31 -0500
List-post: <mailto:amps@contesting.com>
Thanks Will,

The measurements are: 5 1/2" Height, 4 3/4" Wide, 8" Deep.
The end bells look to be made of some "cast" metal, with the legs being
about 3/4" wide, and 3/16" or more thick.  The connections are made
through
porcelain insulators on each side of the transformer, primary on one
side, secondary on the other.

Thanks,

Don Lemley - W8HRQ
w8hrq@comcast.net
 

-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com]
On Behalf Of Will Matney
Sent: Wednesday, May 04, 2005 10:46 AM
To: amps@contesting.com
Subject: Re: [Amps] Another Plate Transformer Question

Don,

What's the height, width, and depth of the core. Also measure the width
of an outside leg. I can ball park the power but without knowing the
wire size, wont be sure whether it's CCS or ICAS, or the exact power.

Best,

Will

*********** REPLY SEPARATOR  ***********

On 5/4/05 at 9:13 AM Don Lemley wrote:

>I just ran on to a HB power supply that looks to have been built for a
>tetrode amp of some sort, with hollow state electronic regulated 350V
>screen supply, etc.
>However, I don't know the actual ratings on the plate xfrmr, and the
>power supply needs several electrolytics replaced, etc before I can
>bring it up.
>My question is, does anyone know the specs on a Thordarson T-21P83
plate
>xfrmr?  I have checked the catalogs that I have been able to find,
>including the 1938/39 and 1942, as well as the newer Catalog #76, but I
>don't find any reference to this puppy.  My guess is that this thing
was
>designed for a half gallon amp, but the screen supply is much too large
>for that, and the plate transformer also looks to be a little large for
>a half kw, so I could use some help if someone has a catalog that lists
>this thing.
> 
>Many thanks in advance,
> 
>            Don
> 
>Don Lemley - W8HRQ
>w8hrq@comcast.net
> 
>_______________________________________________
>Amps mailing list
>Amps@contesting.com
>http://lists.contesting.com/mailman/listinfo/amps



_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>