Amps
[Top] [All Lists]

[Amps] APT parts

To: amps@contesting.com
Subject: [Amps] APT parts
From: "John T. M. Lyles" <jtml@lanl.gov>
Date: Fri, 22 Apr 2005 10:08:25 -0600
List-post: <mailto:amps@contesting.com>
Give Dick Frey (K4XU) a call up there. He is apps 
engineer and can inform you about those parts and 
others for linear use. Also, George Krausse, 
formerly of Directed Energy-Ixys, is their VP, RF 
Products now.

73
John K5PRO


>It looks like Advanced Power Technology has some 300 volt VDMOS
>FETs that do 750 watts in modes A-E (ARF1505).  A push-pull
>pair of them would be very close to legal limit (US) from one
>module.  Two of those modules could be run at 75% ratings with
>splitter/combiner or in push-pull to generate a conservatively
>rated legal limit device.  Of course with 17 dB gain, an ARF1505
>amplifier would require a drive stage (or the 400 watt FT-9000
><G>).?
>
>Anyone know what the devices cost?
>
>73,
>
>    ... Joe, K4IK
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>
  • [Amps] APT parts, John T. M. Lyles <=