Amps
[Top] [All Lists]

Re: [Amps] B&W plate choke

To: John Irwin <crazytvjohn@yahoo.com>
Subject: Re: [Amps] B&W plate choke
From: "Kenneth D. Grimm, K4XL" <kgrimm@adelphia.net>
Date: Tue, 12 Apr 2005 22:14:16 -0400
List-post: <mailto:amps@contesting.com>
John Irwin wrote:
> Dudes
>  
> Does anyone know the specs on a B&W 800 choke?  They currently make a #802 
> .This one is a #800 and I can't seem to find much out about it other than 
> there was one made at one time.
>  
> john kb9tc
> 
 From a 1962 B&W advert:  "This unit (800) is ideal for parallel or 
series fed high power final amplifier circuits.  It is used for 
operation in the amateur bands--80 through 10 meters inclusive.  Winding 
is on a high quality grooved steatite form, threaded on both ends, for 
mounting with a 1/4"-#20 screw.  Rating is 2500VDC at 500 Ma.  Size 6" x 
  3/4" in diameter.  Shipping weight 1 lb."

Hope this helps.  For what it's worth, I've put considerably higher 
voltage and current on and through an 800 with no ill effects.  Your 
mileage may vary.






















'

-- 

Ken K4XL
k4xl@arrl.net

*** BoatAnchor Manual Archive ***
On the web at http://bama.sbc.edu and http://bama.edebris.com
FTP site info: bama.sbc.edu login: anonymous p/w: youremailadr

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>