Amps
[Top] [All Lists]

[Amps] Need info on Heathkit SB-1000 Plate Choke

To: <amps@contesting.com>
Subject: [Amps] Need info on Heathkit SB-1000 Plate Choke
From: "Jeff" <k7xq@elite.net>
Date: Sat, 26 Mar 2005 10:52:48 -0800
List-post: <mailto:amps@contesting.com>
Hello All,
 I recently smoked acouple of windings off my Heathkit SB-1000 plate
choke when the 
SWR off the antenna changed and the plate choke arced across the ground
wire of 
one of the tuning capacitors. The form is still in great shape. I just
need the 
magnet wire gauge and the amount of turns on this choke. 

I noticed the one I have has quite a lot fewer windings then what
appears in the Heathkit manual.

I also need the info on the RF Choke that goes to ground. This is the RF
Choke that is 
located at the output of the output tank circuit. It shows a open to
ground.

K7XQ Jeff
Atwater,CA.

K7XQ Webpage:  http://www.elite.net/~k7xq/k7xq.html

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>