Amps
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [Amps] nylons

from [Steve Thompson] [Permanent Link][Original]
To: amps@contesting.com
Subject: Re: [Amps] nylons
From: Steve Thompson <g8gsq@ic24.net>
Date: Wed, 16 Mar 2005 11:50:57 +0000
List-post: <mailto:amps@contesting.com> 
On Wednesday 16 March 2005 11:39, R.Measures wrote:
> Amen, Karl-Arne
>
> The styrenes - such as ABS - are quite good around RF.
At least one cross linked versions, Rexolite, is really good and also 
mechanically strong. It's horrible to machine, and very difficult to source 
this side of the Atlantic :-(

Steve
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: [Amps] nylons, R . Measures
Next by Date:  Re: [Amps] nylons, R . Measures
Previous by Thread:  Re: [Amps] nylons, R . Measures
Next by Thread:  Re: [Amps] nylons, Bob Nielsen
Indexes:  [Date] [Thread] [Top] [All Lists]