| To: | AMPS <amps@contesting.com> |
|---|---|
| Subject: | [Amps] Anode choke coil former material |
| From: | Tomm Aldridge <KD7QAE@ARRL.NET> |
| Date: | Mon, 14 Mar 2005 04:14:25 +0000 |
| List-post: | <mailto:amps@contesting.com> |
In looking at Anode chokes for my dual GS35b amp, I see that most commercial units are wound on either PTFE (Teflon(tm)) or ceramic. My question is this; has anyone successfully used phenolic tubing, paper, wood, PVC pipe, or other common material to construct a good Anode choke? Tomm KD7QAE _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: [Amps] Alpha -91b Problem, Vic Rosenthal |
|---|---|
| Next by Date: | Re: [Amps] Anode choke coil former material, ToddRoberts2001 |
| Previous by Thread: | [Amps] Alpha -91b Problem, Brass Pounder |
| Next by Thread: | Re: [Amps] Anode choke coil former material, ToddRoberts2001 |
| Indexes: | [Date] [Thread] [Top] [All Lists] |