Re: [Amps] Throttling power on a valved Radio

[G3rzp@aol.com]

With the FT102, switch the speech processor ON. Don't use much processing  
unless you consider soncitions require it - about 2 or 3dB will be adequate, 
and 
 then adjust the drive control (the top knob on the right hand side of the 
radio)  for the desired output.
 
Simpla as that. I leave the speech processor in all the time and with  
minimla speech processing,  get very good audio reports.
 
73
 
Peter G3RZP
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps