This problem occurred in the ghost of Art Collin's, my 30 S-one. Cleaned the
t/r relay contacts with Caig Chemical's De-Oxidt, all was well (for a while.)
Caig chemicals can be found on the web, it is also sold under various other
labels. One is GC chemicals "De-Ox-It."
73,
Gary... wa6fgi
----- Original Message -----
From: Vic Rosenthal
To: ve7avv@shaw.ca
Cc: Amps Reflector
Sent: Wednesday, March 09, 2005 9:41 AM
Subject: Re: [Amps] TL-922 relay problems
Paul B. Peters, VE7AVV wrote:
> My TL-922 has most of the mods suggested by Rich, AG6K -- but one item that
> has not been done is the vacuum relay QSK.
Oops, I thought you said it HAD been done! This is the way the vacuum relays
tend to fail, but in the case of the stock relay, you might need to clean the
receive contacts. The QSK mod is very worthwhile, in my opinion -- even if
you
operate SSB it's nice and quiet.
--
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|