Re: [Amps] Re: 10dB and propagation

[David Kirkby <david.kirkby@onetel.net>]

R.Measures wrote:

> On Feb 7, 2005, at 7:53 PM, Jim Nowotarski wrote:
>
> > How about:
> > 1) the bypass path in the amp had 3dB of loss?
>
>
> The bypass path had the same loss on days when the free-3db was there 
> and on days when it wasn't.   The only variables were propagation and 
> electric-mains potential, which was +/- 2% max (0.17db) .
>
> > ...
>
>
> Richard L. Measures, AG6K, 805.386.3734.  www.somis.org

Rich,
how about submitting the results as a paper to a peer-reviewed 
scientific journal?  The IEEE Transactions on Antennas and Propagation 
would be a likely journal.

http://www.ieee.org/portal/index.jsp?pageID=corp_level1&path=pubs/transactions&file=tap2.xml&xsl=generic.xsl

Much better than QST. Someone once told me a typical circuit in QST was 
"How to build a 12V 1A Power Supply using a 7812 Voltage Regulator."

I'm sure many would be interested to read this if you got it published 
in a peer reviewed professional journal - not an amateur one.

--
Dr. David Kirkby, 
G8WRB

Please check out http://www.g8wrb.org/ 
of if you live in Essex http://www.southminster-branch-line.org.uk/



_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps