Re: [Amps] GS35b.TUB file?

[Tomm Aldridge <KD7QAE@ARRL.NET>]

So far have not found one.  Am somewhat confused by Gain parameter. 
Have no idea what that I but if it is power gain, then I suppose 100W in 
giving 1500W out yields a power gain of 15.

Next to do the VgIg interpolation for 8 Ia values and 2 Va values.

Name      =  GS35B (Name of File, use DOS conventions
                              .TUB extension automatically added)

	VB Max    =  4500    (Maximum Plate Voltage Rating)

        VB Low    =   400    (From Grounded Grid Constant Current
                              Characteristics curves.

        VB High   =  1200    (From Grounded Grid Constant Current
                              Characteristics curves.  ~ 2 to 3 * VB Low)

	Gain      =   15    (Tube Amplification Factor)

        Cin       =  21.5    (Grid-Cath  Capacitance in pF)
        Cout      =  4.5    (Grid-Plate Capacitance in pF)

        PDiss     =  1500    (Max Plate Dissipation of Device)
        GDiss     =    26    (Max Grid  Dissipation of Device)

Tony King - W4ZT wrote:
> I'd be interested in your data file if you build one. I don't have one.
>
> 73, Tony W4ZT
>
> Tomm Aldridge wrote:
>
> > Before I go and make one, does anyone have a GS35b.TUB data file for 
> > teh TAP2 program?
> >
> > Tomm, KD7QAE
> > _______________________________________________
> > Amps mailing list
> > Amps@contesting.com
> > http://lists.contesting.com/mailman/listinfo/amps
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps