Amps
[Top] [All Lists]

[Amps] Red Insulation board

To: craxd1@ezwv.com
Subject: [Amps] Red Insulation board
From: "Harold B. Mandel" <ka1xo@juno.com>
Date: Sat, 22 Jan 2005 14:43:01 -0500
List-post: <mailto:amps@contesting.com>
Dear Will and the Group,

Thank you for all the replies.

In fact, GLASTIC is the stuff. I found out about
its superior qualities while doing power plant work
for Ma Bell, and even the "apple" insulators used in
that equipment is the same material, Glastic, as the
insulating boards that hang the buss bars, etc.

The spec sheet Will posts below shows how the
material is excellent for amplifier module support,
with good electrical and RF parameters.

Hal Mandel
W4HBM

> The trade name is called Glastic. Below is a link to a supplier and 
> a spec  sheet on it.
> 
> http://www.eis-inc.com/oem/catalog/pdfs/rigid/Glastics.pdf
 
> http://www.eis-inc.com/oem/catalog/pdfs/rigid/NVF.pdf
 
> EIS has a store in Louisville and one in Cincinnati.
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>
  • [Amps] Red Insulation board, Harold B. Mandel <=