| To: | Tomm Aldridge <KD7QAE@ARRL.NET>,Amps reflector <amps@contesting.com> |
|---|---|
| Subject: | Re: [Amps] Want to build first amp |
| From: | Vic Rosenthal <vic@rakefet.com> |
| Date: | Wed, 19 Jan 2005 21:15:10 -0800 |
| List-post: | <mailto:amps@contesting.com> |
Tomm Aldridge wrote:it will be expected to provide service from 160m to 6m. This part is a challenge. You will need to build a tank circuit or circuits that can provide a reasonably low Q on 6 meters while still allowing for enough capacity to tune 160. You will probably need to switch plate RF chokes as part of the band change mechanism. -- 73, Vic, K2VCO Fresno CA http://www.qsl.net/k2vco _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: [Amps] Want to build first amp, Steven J Fraasch |
|---|---|
| Next by Date: | Re: [Amps] Grid driven Multi-band amp using 4-1000, Dr. William J. Schmidt, II |
| Previous by Thread: | [Amps] Want to build first amp, Tomm Aldridge |
| Next by Thread: | Re: [Amps] Want to build first amp, Bill Fuqua |
| Indexes: | [Date] [Thread] [Top] [All Lists] |