The 5763 , in osc. svc. would not give more than a couple watts , so a good
qrp rig should should be able to drive that type amp.!!
Just an old thought.!!
carl / kz5ca
----- Original Message -----
From: "doc" <kd4e@verizon.net>
To: <amps@contesting.com>
Sent: Friday, January 14, 2005 7:49 PM
Subject: Re: [Amps] qrp-excited amps
> Bill L. Fuqua wrote:
> > I have a 2KW plasma generator that operates on 13.56MHz that has a
> > small circuit board with only one 5763 tube oscillator driving a
> > neutralized 5cx1500. Why not replace it with a qrp tranceiver.
> >
> > 73
> > Bill wa4lav
>
>
> If I recall correctly those are often converted to mono-band
> amps for use by contesters?
>
>
> --
> Thanks! & 73, doc kd4e
> A blessed and joy-filled New Year to all!
>
> West Central Florida 100% Linux. Suse 9.2
> Hallicrafters, Heathkit, Homebrew, TenTec, Yaesu
> Radio Life: http://www.gospelcom.net/twr/
> Linux-Incompatible hardware is defective!
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|