I will check on the Glowbugs reflector as well as a few others.
Joe W4AAB
----- Original Message -----
From: Mike Sawyer <w3slk@uplink.net>
To: Bob Maser <bmaser@tampabay.rr.com>; AMPS <amps@contesting.com>
Sent: Sunday, December 19, 2004 9:47 PM
Subject: Re: [Amps] Custom Power Transformers
> Bob,
> You may want to try the AM reflector. I understand that the HRO-60
> suffered from this malady. I may have something that would fit but I need
to
> know what the voltages are. I had an HRO-60 that had the power transformer
> replace.
> Let me know.
> Mike(y)
> W3SLK
> ----- Original Message -----
> From: "Bob Maser" <bmaser@tampabay.rr.com>
> To: "AMPS" <amps@contesting.com>
> Sent: Sunday, December 19, 2004 10:11 PM
> Subject: [Amps] Custom Power Transformers
>
>
> Slightly off the subject for this group but maybe someone has some info I
> can use. My HRO60 receiver just went silent key and I have traced the
> problem to the power transformer primary windings. They are showing very
> low resistance and blow the 2A fuse even when everything is disconnected
> from the secondaries. No shorts to ground but it got really hot and the
> fuse blew. Does anyone have a spare? Does anyone know of a custom
> transformer manufacturer besides Peter Dahl. He wants $165 plus shipping
> and I'm hoping to find a cheaper source.
>
> Thanks for reading,
> Bob W6TR
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|