Ok...re-running for full wave doubler
Vout = 9010V with bleeders
Vout = 7615 to 7395V at 4K load (220V ripple)
Ipk turnon = 58 Amps
Still a nice power supply
Joe Subich, K4IK wrote:
Thanks for the numbers, its educational. The program assumes mains
resistance of zero. Since you know the value, it adds to primary
winding resistance.
Results at 240V in, 2.2M RL, parallel 2 x 93 uFd= 186 uFD
Vout = 4435V
Ipk turnon = 70A
Loading the output (knowing what you like to run)
RL = 2K Vout = 4050 to 3985V (65V ripple)
RL=1.5K Vout = 3960 to 3878V (82V ripple)
That's a nice supply.
Problem is the rectifier is a Full Wave Doubler - not a Full Wave
Bridge. Effective capacitance is 93/2 = 46.5 uF.
73,
... Joe, K4IK
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|