In a message dated 20/11/2004 11:40:21 GMT Standard Time, r@somis.org writes:
Since T2 is unfused, if one of the tubes grid-filament
shorts, the +110vdc cutoff-bias supply that is powered by the 80Vrms
winding on T2 sees a short
In my innocence, I would say that's bad design. In fact, to my mind, it has
the potential to be downright dangerous. It certainly doesn't meet good
wiring practice requirements. If I had one, fitting a fuse (in a decent holder
-
not one intended for in line use in cars) would be high priority.
73
Peter G3RZP
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|