Re: [Amps] Line Sections As Plate Lines

[craxd <craxd1@ezwv.com>]

John,
I read that and your correct, 53 cm is 20.86614173". I'm thinking they 
may have just rounded off the number to that, I'm not sure. It's very 
likely that's what they done as it happens a lot when folks are to lazy 
to type the whole number length.

From the website, the dimensions was, quote;

"The plate line is a 55mm dia. copper tube 53cm long, from bottom of 
cooler to top of line."

Best & 73's

Will Matney



JMLTINC@aol.com wrote:

> Hi Will-
>
> Yep, just checked it, PA3CSG's site is down.
>
> There is another pix at http://www.nd2x.net/PA3CSG-2.html
>
> Sorry for the confusion, the 3/10" is the difference between the actual length of the line (20.8") and 1/4wl (20.5" at 144MHz). That is to say the line is 3/10" longer than a true 1/4wl line. How does a line that is 3/10" longer than 1/4wl line become a 1/2wl line?
>
> Thanks-
> John, N9RF
>
>
> __________ NOD32 1.817 (20040719) Information __________
>
> This message was checked by NOD32 antivirus system.
> http://www.nod32.com
>
>
>
>  

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps