To: | amps@contesting.com, amps-bounces@contesting.com |
---|---|
Subject: | Re: [Amps] SAFETY WITH HIGH VOLTAGE |
From: | peter.chadwick@Zarlink.Com |
Date: | Mon, 23 Aug 2004 07:58:29 +0100 |
List-post: | <mailto:amps@contesting.com> |
I'd agree that the 53 ohm one sounds suspiciously low: I suppose it's possible it arced from turn to turn and fused that way. can you see anything wrong with it on a visual inspection? The usual reason for open circuits in wirewounds is, I was told by a manufacturer, frequently corrosion where the coating has a pinhole. These days, I use two bleeders in parallel, and even then, I don't trust them! 73 Peter G3RZP _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | [Amps] Pot needed., wb8jkr |
---|---|
Next by Date: | Re: [Amps] SAFETY WITH HIGH VOLTAGE, R . Measures |
Previous by Thread: | [Amps] SAFETY WITH HIGH VOLTAGE, Will Matney |
Next by Thread: | Re: [Amps] SAFETY WITH HIGH VOLTAGE, R . Measures |
Indexes: | [Date] [Thread] [Top] [All Lists] |