I would have the utilities company put a recording voltmeter on the 240 VAC
line and check it. Sounds like it is losing a ground somewhere.
Joe W4AAB
----- Original Message -----
From: Thomas Hix <w4th@hotmail.com>
To: <amps@contesting.com>
Sent: Tuesday, August 17, 2004 1:15 AM
Subject: [Amps] RE: Need Help
> I guess I didn't explain my situation very well.......When the problem
with
> the arcing/buzzing sound is coming from the amp, and the HV meter is
showing
> split second deflection at the same time as the arcing sound, the amp is
not
> in transmit mode, it does it even before the step start timer kicks in, it
> continues to do it after the step start kicks in.....I do not key it up
> because I am afraid to with it acting this way, so it is not RF getting
back
> into the amp as some of you have suggested......it cant be because there
is
> no drive applied.
>
> Thanks again.
> Tom......W4TH
>
>
>
> Tom's Tubes: Specializing in Amateur Radio Amp Tubes & Sockets Also G3SEK
> Triode/Tetrode Boards & Kits http://www.tomstubes.com
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|