Amps
[Top] [All Lists]

Re: [Amps] Trouble with LK500-ZB

To: <CGranski@aol.com>, <amps@contesting.com>
Subject: Re: [Amps] Trouble with LK500-ZB
From: "Barrie Smith" <barrie@centric.net>
Date: Thu, 20 May 2004 20:02:52 -0600
List-post: <mailto:amps@contesting.com>
There are padding caps switched in on 160.  And worse, if the amp is stock,
they are disc ceramic.  Check there.

73, Barrie. W7ALW


----- Original Message ----- 
From: <CGranski@aol.com>
To: <amps@contesting.com>
Sent: Wednesday, May 19, 2004 8:11 PM
Subject: [Amps] Trouble with LK500-ZB


> Have an Amp Supply LK500-ZB that has developed a problem on 160 meters.
This amp uses a pair of 3-500's in grounded grid. Power output on a Bird has
dropped to ~400 watts max and it draws excessive plate current with more
than 50 watts of drive power. Performance on all other bands is normal and
the problem is present with a dummy load or antenna. The ceramic caps
switched in on 160 have all just been replaced with no improvement. Input
SWR is normal.
>
>
> Any ideas as to what may be wrong?
>
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
> ---
> [This E-mail scanned for viruses by CENTRIC INTERNET SERVICES]
>
>


---
[This E-mail scanned for viruses by CENTRIC INTERNET SERVICES]

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>