Amps
[Top] [All Lists]

Re: [Amps] sb-200 power cord

To: "George Yazz" <kc7hkp@teleport.com>
Subject: Re: [Amps] sb-200 power cord
From: R.Measures <r@somis.org>
Date: Thu, 6 May 2004 19:48:22 -0700
List-post: <mailto:amps@contesting.com>
  see:
http://www.somis.org/sb_220_wd.gif


On May 6, 2004, at 2:40 PM, George Yazz wrote:


Help

i am changing a Heathkit SB-200 form 220 volts to 110 volts. (no choice)
on the 4 wire grid on the underside of the amp, which is HOT and which is NEULTRAL NO' Screws 1,2,3, or 4. I know green is Ground
i am not sure how to tell which would be the hot screw on the 6 screw wire terminal, i know the 2 outer are ground.


thanks very much

P. George Yazzolino
14801 NE 20th Circle
Vancouver, Wa. 98684
KC7HKP  Grid  CN-85
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps


Richard L. Measures, AG6K, 805.386.3734. www.somis.org

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>