anything that will stick will do the trick
- provided it does not have a high D-Factor.
cheers, Carl
On Apr 19, 2004, at 5:02 PM, carl seyersdahl wrote:
What about Q-dope , Rich. is that good to use.???
carl / kz5ca
----- Original Message -----
From: "rlm" <r@somis.org>
To: "carl seyersdahl" <carlseye@tampabay.rr.com>
Sent: Monday, April 19, 2004 6:38 PM
Subject: Re: [Amps] wire ga.
 Neither did I until I wound one, Carl. When the wire gets warm it
lengthens and becomes slightly loose on the form. When the choke is
warm, this looseness allows the rattling sound during voice modulation.
cheerz
On Apr 19, 2004, at 3:32 PM, carl seyersdahl wrote:
Rich: I didn't know the choke would do that, but then I've never had
to
rewind one either. I'll keep that in mind.
thanks , have a good day.!!
carl / kz5ca
----- Original Message -----
From: "rlm" <r@somis.org>
To: "carl seyersdahl" <carlseye@tampabay.rr.com>
Cc: <Amps@contesting.com>
Sent: Monday, April 19, 2004 6:00 PM
Subject: Re: [Amps] wire ga.
ð Carl -- Coating the winding with urethane varnish will keep the
wires from rattling on SSB.
On Apr 19, 2004, at 4:23 AM, carl seyersdahl wrote:
Thanks to all who answered my wire ga. question.!!
I took off the old wire , compared it to my spools of 24-26-28-30
ga. and
decided that 26 looked like the best replacememt . So , I rewound the
choke
with 26 ga.and will see how good it is when I finish the power supply
replacement .
Thanks again to all.!!!
carl / kz5ca
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
Rich Measures, AG6K, 805.386.3734. www.somis.org/
Rich Measures, AG6K, 805.386.3734. www.somis.org/
Rich Measures, AG6K, 805.386.3734. www.somis.org/
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|