"Any tips on acceptable manufacturers for this amp? Also
any suggested sources would be appreciated. I am aware
of RF Parts w/Svetlana and Taylor branded tubes, but
not of their performance in this application."
Thanks!
John K5MO
I'm using Taylors in my SB-200. They perform immaculately. Be sure to
set the filament voltage correctly, as it tends to run high due to the
increased nominal line voltages these days. I rewound my filament choke
using 18 gauge wire which did the trick nicely.
73, Roy K6XK/0
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|