John said:
>Tuned to resonance with no load,
This somewhat puzzles me. I would have expected it to be tuned higher in
frequency ( although maybe no more than 0.5 to 1 Hz) so that it looked very
inductive under no load conditions. As the load increases and the critical
inductance comes down, the decrease in inductance will shift the resonance
higher, but I understand the idea is still to keep above critical
inductance - which suggests you can't use a very low value of inductance
and rely on getting very close to resonance.
If the circuit really is resonant, surely it looks like a (very) high
series impedance at low load, and being resistive, will no longer keep a
constant current flowing into teh reservoir capacitor?
73
Peter G3RZP
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|