I have used that kind of resin for making the connectors needed for
the Harris RF-110A amp power supply cable.
Just inserted properly sized contacts in the connector's body and filled
with the resin (dual) compound. The connector seems rock solid.
The HV pin contact clearance is about 1/2". No problem at 2500V.
I made a detailed document regarding that experiment, which is
available for the interrested peoples. Just they let me know.
73,
Traian, YO9FZS
"R.Measures" wrote:
> ? I bought 50-lbs of porcelain clay and I tried making porcelain
> pottery. The shrinkage factor is about double ordinary stoneware clay,
> and porcelain clay is hellish to work with. My advice is use G-10
> fiberglass-epoxy for insulating. It's good around RF, strong, and easily
> drilled/machined.
>
> >My YL has a ceramics business, and I started thinking about trying to
> >manufacture my own ceramic (porcelain) insulators. Has anyone tried this?
> >
> >73 Mike N6MZ
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|