? Larry -- If you convert the 4-1000A to grid-driven, AB1, no tuned
input is needed for 160m, or for 80m and 40m operation. The needed
screen supply can be derived off of the anode supply bleeder-R and a
zener-string. However, power-out will be c. .1/7 of a S-unit less in
grid-driven than in g-g.
>Hi guys, I recently recieved a home brew 4-1000a amplifier. Amp is tapped
>for 160 only and running just 1 tube. High voltage is near 5000. This amp
>has no tuned input circuit and Im not a very good builder. Does anyone
>have a schematic or know where I can get a tuned circuit for this one band
>amp? My Yaesu tunes to abt 1.6 swr on auto tuner and antenna standing wave
>is less than 1.5.
>
>I have read enough here to know thats there is some sharp fellows on the
>list.
>
>thanks Larry WB9F
>_______________________________________________
>Amps mailing list
>Amps@contesting.com
>http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|