To: | ForSale-Swap@mailman.qth.net, amps@contesting.com |
---|---|
Subject: | [Amps] WTS: Eico model 710 dip meter. $37 incl postage |
From: | tongaloa <tongaloa@alltel.net> |
Date: | Sun, 29 Feb 2004 19:03:19 -0500 |
List-post: | <mailto:amps@contesting.com> |
Description from:http://edebris.com/catalog2/item/1281 where you can also see photos. Thumbnails there link to detail. EICo model 710 grid dip oscillator/meter The good: It's extremely clean on the inside and the dial is nice. It dipped my 70Mc or so test coil just fine. It has the original coil box and all the coils are there(open slot is for the coil that's plugged in) The bad: I would recommend checking power supply filter for excess leakage. There is a poor connection and if you don't hold it just right it does not power up You'll have to scout up a copy of the manual, BAMA mebbe? The ugly: Look at the outside, it really needs a clean up. The plastic shrink identifiers for the coils are cracked and coming off I had to clean the pins on the 100Mc coil I used to check operation, you'll have to clean the others. I also have a few things on ebay right now... http://cgi6.ebay.com/ws/eBayISAPI.dll?ViewSellersOtherItems&userid=ah7i <http://cgi6.ebay.com/ws/eBayISAPI.dll?ViewSellersOtherItems&userid=ah7i> Thanks, -Bob
|
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: [Amps] 2 x 8877, Jan Erik Holm |
---|---|
Next by Date: | Re: [Amps] RE: Alpha 87A Problems Solved, ka1xo |
Previous by Thread: | [Amps] HP8640, Marv Gonsior |
Next by Thread: | [Amps], R . Measures |
Indexes: | [Date] [Thread] [Top] [All Lists] |