Re: [Amps] Chimney Material

[Mike <k4gmh@arrl.net>]

Chuck's right as the chimney for my 4CX1600B amp. is made from the auto 
gasket material.  The amp. has been in use since 1996 on RTTY.

At 07:24 AM 2/26/04, hahn wrote:
> Ok guys I found a cheap place to get silicone rubber; NAPA, yes the auto
> parts supplier. They have gasket material 24"x12"x1/32" thick or
> thicker. for about 5.99 a box rolled up. It a little stiffer but a whole
> lot cheaper! It will stand temps of over 250 degrees. Check it out!
> Chuck AI4BB
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps

        73,
        Mike, K4GMH 
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps