All,
What is the recommended grid-gnd circuit?? The original sb-220 had an LC
network; it seems to be a common recommendation to replace the coil with
a 33 OHM resister. Are the caps changed as well??
Thanks,
Dan
R.Measures wrote:
** Disc ceramics have less less L than silver-micas. Also, the grid-gnd
circuit is not part of the tuned input circuit, so the stability of a
silver mica is not needed.
Need some Elmering.
Can anyone explain why the Harbach Suppressor kits use Ceramic Disc instead
of Dipped silver micas for Rf choke replacements?
Thanks in Advanced
Chris
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|