Re: [Amps] FL2100b on SIX? Possible

[Gary Schafer <garyschafer@comcast.net>]

Gudguyham@aol.com wrote:
> In a message dated 2/7/04 01:19:44 AM Eastern Standard Time, stevek@jmr.com 
> writes:
>
>
>
> > > Look all over the net!
> > > can't find a mod to put the FL2100b onto
> > > sixmeters.
> > > Any ideas?
> > >
> > > //This has been tried unsuccessfully, but I don't know anybody who's
> > > actually made it work!  572Bs are of very limited use above 30 MHz
> > > (they're only actually "rated" to 30 MHz), and a conventional pi-net
> > > probably won't work because with zero tuning C the tank will resonate
> > > below 50 MHz, using any reasonable L/C ratio.  -WB2WIK/6
> > >
> > > Thanks Etienne ZS6Y
>
> *******The SB-200 makes a pretty good 6 meter amp using the 572B tubes.  Not 
> ALL 572B tubes work well on 6 meters, but some do.  My suggestion...Sell your 
> 2100B get an SB-200.  I tried a 2100B on 6 and had alot of problems, gave up.  
> Have done MANY SB-200's and they are on the air now as proof.  Try  <A HREF="http://w1qj.com/";>6 METER 
> AMPLIFIERS</A> .
> 73 LouieW1QJ



Hi Louie,

How is the 2100B any different from the SB200?

73
Gary K4FMX



_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps