Re: [Amps] YC156 fitting screws

[Norman Hockler <norsan@bright.net>]

At 07:33 AM 1/27/04 +0000, you wrote:
> Neil,

The grid ring screws are 10-32 and the filament and cathode screws are 10-24.
Use metric screws for the grid ring....just put them through the unthreaded 
holes.
There is plenty of room to tap out the cathode and filament holes to use metric
so you dont need any SAE stuff.

Norm  N8NH
(seller of YC-156 tubes)

> I am  trying to get hold of some screws for the YC156 tube,
>  the 4 cathode and the 1 filament screw.
>
> Anything that isn't metric is hard to find these days over here.
>
> I have tried all the local Hams "non metric" screw junk boxes to no avail.
>
> Anyone know the thread?  Or even have some?
>
> They are different to the 4 on the grid ring.
>
> Happy to pay for them +shipping.
>
> Help appreciated.
>
> 73 Neil G0JHC.
>
>
>
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps



_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps