Offering the following package of components for the amateur
contemplating the construction of a serious linear amplifier. The package
includes the following items:
A. Brand new 1989 date coded (tested only at 2200W output) Eimac
8877/3CX1500A7 triode.
B. Teflon heavy wall chimney
C. Complete silver plated 10-80m tank circuit complete with detented 2P5T
porcelain heavy duty Radio Switch. Removed intact and ready to drop in.
Second pole can be utilized to tandem switch in a tuned input circuit
or paralleled for additional power handling capabilities.
D. dual section air variable antenna tune capacitor (200pFd per section)
E. plate tune air variable capacitor (100pFd) rated at 4KV
F. 100 pFd 5KV plate tune porcelain padding capacitor
G. Custom machined heat dissipating aluminum plate cap
H. Parasitic choke assembly (coil/resistor + 20KV-500Pfd blcoking
capacitor)
I. RF bypass bypass output choke
J. Custom wound 1" solid porcelain HV anode choke. Threaded both
ends.(#20 enameled)
K. New industrial quality porcelain air system tube socket w/grid to
ground tabs.
L. two (2) Western Electric 12VDC/10W zener diodes
M. Complete 8877/3cx1500A7 Eimac data sheet
$575+ shipping Ron W2CQM/3
See the Yahoo site listed below for a digital of the components offered.
Click on amp parts.
Epilogue: visit www.QRZ.COM/W2CQM for a listing of the most recent
articles authored by W2CQM. For an update on the most recent Heath 6m
dedicated retrofits and Drake L4B/8877 project(s) see
HTTP://Briefcase.Yahoo.com/W2CQMron
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|