Amps
[Top] [All Lists]

Re: [Amps] Maximum tolerable SWR for dual 3-500Z amps

To: <jsb@digistar.com>, " AMPS" <amps@contesting.com>
Subject: Re: [Amps] Maximum tolerable SWR for dual 3-500Z amps
From: R.Measures <r@somis.org>
Date: Thu, 20 Nov 2003 04:36:01 -0800
List-post: <mailto:amps@contesting.com>

>
>Is there a rule of thumb for maximum permissible SWR for 3-500Z amps at
>given levels of output power?
>
>Say, 300 watts for 2:1 SWR or 800 watts for 1.5:1 SWR, etc?  For SSB and
>CW modes?

**  If the tank Tune-C and Load-C are not at the stops, the amplifier 
tubes will not know the difference.
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>